Portable CMOS Sensor 30 fps Cycle Recording SD Card Slot Vehicle DVR - H189

Portable CMOS Sensor 30 fps Cycle Recording SD Card Slot Vehicle DVR - H189
With a 300K pixel CMOS sensor, this DVR has 640 * 480 (VGA) resolution and 30 fps. Cycle recording is available. Connect Mobile-i to PC by USB cable, you can execute STK02N 2.0.EXE anytime for running Mobile-I as a PC camera. It supports SD card memory from 1 GB to 32 GB. Multi-languages are supported.

Driver Installation
1. Insert CD-Rom into CD-Rom driver. And then copy the 'STK02M' folder & 'RTCRW.exe' time setting applications to PC for backup.
2. Double click to execute 'STK02N' to install the driver to PC. Click finish after automatic installation.
* Please setup the Date & Time into Mobile-i before installing to your vehicle.

Date & Time Setting (PC)
1. Press & hold the 'Enter' key, then connect Mobile-i to PC by USB cable. PC will start to search the driver for Mobile-i and all the windows will close automatically after ready.
2. Execute 'RTCRW.exe' , then double click 'Set Host Time Into RTC' to update the PC system time into RTC. After that, double click 'Get Current Time From RTC' to confirm the current time in RTC.
3. Time setting complete.
4. We recommend user updates the time every 6 month.

Date & Time setting (TV)
1. Connect Mobile-I to TV or AV monitor by TV cable.
2. Press 'Power & Video on-off' key for 3 seconds. Real time image will display on TV or AV monitor.
3. Press 'Mode' key, monitor will show up the Manu Interface.
4. Use 'Up / Down' key to enter 'Format' selection, then press 'Auto Video' key to enter detailed setting interface.
5. Use 'Up / Down' key to enter 'Date Setting' Option.
6. Press 'Enter' key and select 'Set' as below.
7. Use 'Up / Down' key and 'Power & Video on-off' key to adjust the date and time format. Press 'Enter' key to save and quite.
8. Date and time setting complete.

Mobile-I installation
1. Open the SD card cover and insert a SD card into the slot in the indicated direction (support SD card up to 32GB).
P.S.: The SD card must be inserted in the indicated direction. Otherwise may cause damage or recording error.
2. Two kinds of holders are included: Suction Cup Holder and Fixed Holder. You can choose any one according to your own choose. Then fix the Camera on the Holder as below and make sure the direction is correct.

a. Suction Cup Holder Please clean up the windshield (inside) and keep it dry. Put the holder in front of rear mirror then press the lever down to ensure the holder was fixed well.
b. Fixed Holder
Please clean up the windshield (inside) and keep it dry. Peel backing paper off and then stick it onto windshield by adhesive. Push firmly to secure holder.

3. Connect Car Charger to Mobile-i slot for power supply.
4. Finally, please adjust the lens angle. There are two methods as below.

Connect Mobile-i to video device.
a. Use TV cable to connect Mobile-i to your own video device.
b. Turn on the power supply of car or start the engine then Mobile-i will start recording immediately, real time image will display on the screen.
c. Use a screw driver to loosen the Camera Lock, adjust the lens angle according to screen then lock it.

Connect Mobile-i to notebook.
a. Press & hold the 'Enter' key, then connect Mobile-i to notebook by USB cable.
b. 'Image Download Utility' will auto start. You can close it at once or wait for 15 minutes for its auto close.
c. Execute 'STK02NC.EXE'.
d. Please click the icon in the top left hand corner to start video, real time image will display on the screen.
e. Use a screw driver to loosen the Camera Lock, adjust the lens angle according to screen then lock it.
*If you don't have any video device, please test recording and play back on PC or TV.

Recording
1. After finishing the installation, Mobile-i will auto start with the Green LED on and beep sound alert when you start the engine.
2. Wait for seconds, Red LED will flash when Mobile-i start recording automatically.
3. Use the 'Mic on/off switch' key to set the sound recording.
4. Mobile-i needs one or two seconds to search information. If you stop engine during the time, it may stop recording. You have to press & hole the 'Enter' key to restart record in this case.
5. Do not pull out SD card during recording, it may damage SD card or recording data.
6. Stop engine, Mobile-i keep on recording for 10 seconds and then shutdown.
7. Every movie clip is 3mins and the interval between every clip is about 1 sec.
8. Recording time depends on SD card memory. After the SD card memory is full, Mobile-i will erase the first 15mins data to free up the memory for continue recording.
9. You will get a Beep sound alert if the car charger loosened during driving. Mobile-i will stop recording after 10 seconds. Please reconnect the car charger under safe condition.
10. The four keys in its tail are only used to connect PC or video device while no use during recording.

PS. Certain car models may keep the Mobile-i power on even you stop the engine. If the Red LED keeps on, it means car charger keeps working. Please pull out the charger to avoid previous video have been overwrite.

Warning:
* Do not disassemble or remodel any units, or our company disclaims all responsibility.
* Do not put the product into fire, or our company won't responsible for any malfunctions and calamities may cause.
* Please comply with our user manual to connect power supply, or our company disclaims all responsibility.
* Do not pull out SD card during recording. Otherwise may cause damage to product and video.